[NCLUG] Download hangups

[Bonnell Frost]

Sorry, I should have specified MB/sec. My connection with skybeam is 
nominally 500MB, and it usually runs a little over that with a good 
connection. I specified 1/2 gig/second, which was correct.
Bonnell Frost

Ray Frush wrote:
> On 08/21/13 09:09, Bonnell Frost wrote:
>> I found a solution, not really a reason. When I have my 1000KB 
>> connection activated, it happens. This is p33p1, 192.168.0.102. When 
>> I have my 100 KB connection activated, no interruptions. It is eth1, 
>> 192.168.0.101. Strangely, the speed on this latter connection is 
>> still about 500KB, 1/2 gig per second.
>
> Is it possible you're mixing up 1000KB with 1000Mbps (1Gbps) which 
> would be a very common speed for an ethernet port. 1000KB (1MB) would 
> be a pretty old device. I've never heard of a 100KB (is that KBytes or 
> Kbits) as a standard speed of an ethernet port. And am I the only one 
> that automatically read "p33pl" as "people"? Geez!.
>
>
> -- 
> Ray Frush
> KRFC and beyond...
> _______________________________________________
> NCLUG mailing list NCLUG at lists.nclug.org
>
> To unsubscribe, subscribe, or modify
> your settings, go to:
> http://lists.nclug.org/mailman/listinfo/nclug
>