[NCLUG] Re: NCLUG digest, Vol 1 #826 - 16 msgs

[Scott Kleihege]

n Tue, 14 Jan 2003 16:00:46 -0700, <dieterly at frii.com> wrote
> i have an external intel dsl modem with a usb connector.  no other hardware.
> if
> i need hardware, i would be happy to get it.
...
> > also, i'd like to get linux to use my dsl line.  is there somebody
out
> there
> > who can help me with that?  i've tried to use my 56k us robotics modem,
> but
> > the connect speeds are terrible.

There *might* be Linux drivers, but I believe that the Intel 3100/3200 DSL
Modems only have Windowz drivers; they don't even have Macintosh drivers.

If you do decide to go with a used Cisco 678 (maybe as little as $50 on
e-bay), make sure it includes the (light-blue) management cable and power
cord.  You may also be able to contact Qwest and lease an ActionTec
router for about $5/month.

Another important issue is your line type.  You probably have a DMT line
(if you have an Intel 3200), and your router/modem will need to support
that.  If your line was installed several years ago, it might be a CAP
line, and if so, you'll have to get a CAP router (like the Intel 3100).
Cisco 678s will do either line type, but I think ActionTecs only work on
DMT lines.

Good Luck,

Scott