[NCLUG] Re: NCLUG Digest, Vol 4, Issue 14

Tim the1mavin at yahoo.com
Tue Feb 24 12:41:01 MST 2004


Hello,

I don't know if this is the proper way to reply so if
not please let me know the correct way.  

Joel--I was not able to get any of the Qwest DSL
internal modems to function under Linux.  The best
route I have found is pick up a Cisco 675 or Cisco 678
on eBay or ???  They are DSL Routers that Qwest uses
and there are plenty out there for cheap.  Just make
sure the one you buy is not password protected and
comes with the cables (unless you have some Cisco
cables laying around).

Good Luck
Tim
--- nclug-request at nclug.org wrote:
> Send NCLUG mailing list submissions to
> 	nclug at nclug.org
> 
> To subscribe or unsubscribe via the World Wide Web,
> visit
> 	http://www.nclug.org/mailman/listinfo/nclug
> or, via email, send a message with subject or body
> 'help' to
> 	nclug-request at nclug.org
> 
> You can reach the person managing the list at
> 	nclug-owner at nclug.org
> 
> When replying, please edit your Subject line so it
> is more specific
> than "Re: Contents of NCLUG digest..."
> 
> 
> Today's Topics:
> 
>    1. install event interest (Paul Price)
>    2. new to linux, nclug, etc (Joel Nevison)
>    3. Re: new to linux, nclug, etc (Jim Turpin)
>    4. Re: new to linux, nclug, etc (Joel Nevison)
>    5. Re: new to linux, nclug, etc (Jim Turpin)
>    6. Re: new to linux, nclug, etc (Simon
> Branton-Housley)
>    7. Beating spammers with SpamAssassin 2.63
> (jbass at dmsd.com)
> 
> 
>
----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 23 Feb 2004 13:54:42 -0700 (GMT-07:00)
> From: Paul Price <paul.price at earthlink.net>
> Subject: [NCLUG] install event interest
> To: "nclug at nclug.org" <nclug at nclug.org>
> Message-ID:
> 
>
<1740632.1077569686380.JavaMail.root at bigbird.psp.pas.earthlink.net>
> Content-Type: text/plain; charset=us-ascii
> 
> Hi folks,
> 
> I'm looking to increase my competencies with Linux
> and would greatly appreciate an "install event" in
> this area. I've also talked to some friends that may
> also be interested. I think the northern Denver
> group does these regularly.
> 
> Personally, I'm having problems moving beyond the
> "simple" install for X. I am unable to get the
> NVIDIA driver to work with my system (auto-detected
> "nv" driver working OK). In particular, I'd like to
> be able to use 2 monitors since my card supports it
> (5200). The doco that came from the Nvidia site is
> not helping much.
> 
> I'm also new at setting up a printer and getting
> connected via modem. I've looked briefly at the
> "how-to" for these but haven't exaused these docs
> yet (just haven't had the time). I am planning to
> get cable-modem soon (Comcast), so pointers here
> would also be appreciated.
> 
> Perhaps this topic could be discussed at the next
> NCLUG meeting and if appropriate, a date and
> location be set for the event.
> 
> Thanks,
> Paul Price
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 23 Feb 2004 17:43:00 -0800 (PST)
> From: Joel Nevison <jvnn at yahoo.com>
> Subject: [NCLUG] new to linux, nclug, etc
> To: nclug at nclug.org
> Message-ID:
> <20040224014300.54976.qmail at web40907.mail.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> 
> Hi, I have been flailing away at the learning curve.
>  I've got slack 9.1 going and am starting to get
> icewm configured.  My question is this; I've got
> qwest dsl in Fort Collins on a windows box and the
> intel 2100 modem is a no-go for linux.  I am looking
> for a cheap external (lan or usb) dsl modem.  I see
> at buy.com the zoom adsl x3 5560 and the hawking
> tech har11a that I can afford.  Does anybody have
> experience with these, or know howto figure out if
> they will work with my qwest line?
>  
> Thanks - Joel
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail SpamGuard - Read only the mail you want.
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 23 Feb 2004 20:41:29 -0700
> From: "Jim Turpin" <jim at jimsrevenge.com>
> Subject: Re: [NCLUG] new to linux, nclug, etc
> To: "Northern Colorado Linux Users Group"
> <nclug at nclug.org>
> Message-ID: <001d01c3fa88$16c373b0$6400000a at yimmy>
> Content-Type: text/plain;	charset="iso-8859-1"
> 
> dunno if your current modem has lan, if it does then
> just go buy a cheap
> router and run them both online at the same
> time......
> 
> 
> ----- Original Message ----- 
> From: "Joel Nevison" <jvnn at yahoo.com>
> To: <nclug at nclug.org>
> Sent: Monday, February 23, 2004 6:43 PM
> Subject: [NCLUG] new to linux, nclug, etc
> 
> 
> > Hi, I have been flailing away at the learning
> curve.  I've got slack 9.1
> going and am starting to get icewm configured.  My
> question is this; I've
> got qwest dsl in Fort Collins on a windows box and
> the intel 2100 modem is a
> no-go for linux.  I am looking for a cheap external
> (lan or usb) dsl modem.
> I see at buy.com the zoom adsl x3 5560 and the
> hawking tech har11a that I
> can afford.  Does anybody have experience with
> these, or know howto figure
> out if they will work with my qwest line?
> >
> > Thanks - Joel
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail SpamGuard - Read only the mail you
> want.
> > _______________________________________________
> > NCLUG mailing list       NCLUG at nclug.org
> >
> > To unsubscribe, subscribe, or modify
> > your settings, go to:
> > http://www.nclug.org/mailman/listinfo/nclug
> >
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 23 Feb 2004 20:20:34 -0800 (PST)
> From: Joel Nevison <jvnn at yahoo.com>
> Subject: Re: [NCLUG] new to linux, nclug, etc
> To: Northern Colorado Linux Users Group
> <nclug at nclug.org>
> Message-ID:
> <20040224042034.78318.qmail at web40913.mail.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> 
> Don't I wish...  it's an internal pci card, no linux
> drivers available except for one rumored to be
> dropped at some stage of partial development by the
> manfuacturer.  As if that wasn't bad enough, I think
> it 's even a "winmodem."  I considered using an old
> box running win 95 as a gateway with a proxy server,
> but it's too slow and I just don't want to maintain
> windows junk any more.  The two modems I mentioned
> are 4 port routers with a dsl modem so...
> - Joel
> 
> Jim Turpin <jim at jimsrevenge.com> wrote:
> dunno if your current modem has lan, if it does then
> just go buy a cheap
> router and run them both online at the same
> time......
> 
> 
> ----- Original Message ----- 
> From: "Joel Nevison" 
> To: 
> Sent: Monday, February 23, 2004 6:43 PM
> Subject: [NCLUG] new to linux, nclug, etc
> 
> 
> > Hi, I have been flailing away at the learning
> curve. I've got slack 9.1
> going and am starting to get icewm configured. My
> question is this; I've
> got qwest dsl in Fort Collins on a windows box and
> the intel 2100 modem is a
> 
=== message truncated ===


__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools



More information about the NCLUG mailing list