<div dir="ltr">Hi Jeffrey,<div><div>There are two SATA ports internal on the machine. I think I would also need a power adaptor cable to supply power to the SATA drive and I would choose an SSD SATA drive. One SSD drive is sufficient since this is to be used only as a computing box for modeling purposes running headless and not as storage. I'm looking at another used server for that. Just need to be sure I can get this box to boot and get Linux installed. Being that it's headless - I need to check but there might not be a graphics monitor drive capability.</div><div>Just wondering if I could get Ubuntu installed and running using a SATA SSD drive on this?</div><div>Thanks,</div><div>Phil</div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Oct 3, 2022 at 9:20 PM Jeffrey Means <<a href="mailto:jeff@meanspc.com">jeff@meanspc.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div id="m_-3513526539949108830edo-message"><div><div>Phil, if you keep watching the surplus department, CSU will surplus out multi drive hotswap servers from time to time. These units don't come up often but when they do they are a great find. I've found doing this to be a cost effective way of building out a 15 drive RAID-6 hotswapable array for myself. Basically I kept the case for the hotswapable drives and the motherboard was a decent SuperMicro with a pair of Xeon processors mounted. I did replace the OS(it ran a proprietary version of BSD when I first bought it), and a PCIx RAID controller with a PCIe x8 SATA controller with 16 internal ports. This box is now running Ubuntu 22.04.1 and has a paltry 50TB accessible through the RAID6 array it is hosting for online backups and my media library. </div><div><br></div><div><br></div><div id="m_-3513526539949108830edo-signature"><pre><div>---</div><div><div><span style="font-size:16px">Jeffrey D. Means</span></div><div><span style="font-size:16px">Consultant, MeansPC</span></div><div><span style="font-size:16px;white-space:normal"><br></span></div><div><span style="font-size:16px">+1(970)308-1298 | <a href="mailto:jeff@meanspc.com" target="_blank">jeff@meanspc.com</a></span></div><div><span style="font-size:16px"><a href="https://www.meanspc.com/" target="_blank">https://www.meanspc.com/</a></span></div><div><span style="font-size:16px">6803 Antigua Dr. #72,</span></div><div><span style="font-size:16px">Fort Collins, CO 80525-6946</span></div></div></pre></div></div></div><div id="m_-3513526539949108830edo-original"><div><blockquote type="cite" style="margin:1ex 0px 0px;border-left:1px solid rgb(204,204,204);padding-left:0.4ex"><div id="m_-3513526539949108830edo-meta">On Oct 3, 2022 at 21:02, Phil Marsh <<a href="mailto:microcraftx@gmail.com" target="_blank">microcraftx@gmail.com</a>> wrote: <br><br></div><div dir="ltr">Hi all,<div>I was looking at getting some older servers to beef up compute power here and also for a SATA server (ZFS).</div><div>I've found a Dell Compellent SC8000 at CSU surplus for $250 which has 2XE52640 Xeons and 64GB RAM. It seems OK for what I need but I think it requires an external SAS storage caddy if you want to add drives. I'm thinking it would be cheaper and better to also get the Proliant DL 120G6 which appears to take four SATA drives for 50 bucks from CSU Surplus as well?</div><div>I like the dual E5-2640 Xeons and this server does appear to have an internal SATA data connection. I would likely just add one internal SATA SSD drive to boot it and hold the OS - because I would use the Compellent primarily for CPU power.</div><div><br></div><div>Not really sure how to add SAS or SATA drives to the internal caddies?<br></div><div>Any thoughts or suggestions?</div><div>Thanks and best,</div><div>Phil</div></div>
<br></blockquote></div></div></blockquote></div>