[NCLUG] ds: no socket drivers loaded!

Matt Pujol mattp at lsil.com
Thu Nov 14 17:02:08 MST 2002


When you look in /proc/pci do you see both the network card and the modem?
If not, your system is not recognizing one of the cards when booting up the
PCI bus.  It may be something as simple as PCI interrupt sharing, which you
ought to be able to muck with in the BIOS settings.

/***********************
Matt Pujol
CoreWare Product Marketing
USB and 1394 CoreWare Technologies
Consumer Custom Solutions Division

LSI Logic
2001 Danfield Court
Fort Collins, Co 80525
970-206-5816
970-206-5116 fax
matt.pujol at lsil.com
***********************/

-----Original Message-----
From: nclug-admin at nclug.org [mailto:nclug-admin at nclug.org]On Behalf Of
Christopher C.J. Keist
Sent: Thursday, November 14, 2002 2:30 PM
To: nclug at nclug.org
Subject: Re: [NCLUG] ds: no socket drivers loaded!


No, I didn't touch the kernel at all.  Just installed the driver for the
modem (rpm package), instructions said nothing about building a new
kernel.  I don't have any PCMCIA support, correct me if I'm wrong, but
PCMCIA I thought was only needed for laptops.
The loading of that driver must of messed up something with startup
scripts or something.  Because the network driver is not being loaded
even if I boot with my backup kernel, which is suppose to be my safety
net when I screw up my default kernel.

On Thursday, November 14, 2002, at 11:08  AM, Benson Chow wrote:

> This means something blew up dealing with the PCMCIA socket drivers.
>
> Did you recompile your kernel or something to get the HCF (bleah)
> driver?
> Are you inserting the pcmcia modules or are they built into the kernel?
> Did you rebuild the PCMCIA drivers?  Same version in /lib/modules/...?
>
> I believe the 'socket drivers' is the particular driver for your pcmcia
> host bridge.  lsmod, you should see pcmcia_core and your particular
> driver
> (maaybe TI PCI1420 or i82365 or I dont know what ibooks use, unless you
> have them statically linked into your kernel).
>
> Can't give a definitive answer... hope this is a start though.  Would
> also
> explain why your (assumed) PCMCIA ethernet card isn't working either.
>
> -bc
>
> On Thu, 14 Nov 2002, Christopher C.J. Keist wrote:
>
>> Date: Thu, 14 Nov 2002 09:37:24 -0700
>> From: Christopher C.J. Keist <cjay at engr.colostate.edu>
>> Reply-To: nclug at nclug.org
>> To: nclug at nclug.org
>> Subject: [NCLUG] ds: no socket drivers loaded!
>>
>> I hope someone can respond quickly, because in 5 seconds I'm going to
>> be
>> tossing my PC out the window!!!!!!
>> Anyway, I had a perfectly happy PC running RH7.3, until I decided to
>> see
>> if I could get the modem to work on it.  I looked at what type of modem
>> I had (Rockwell International HCF 56K data/fax modem) and saw that I
>> needed to down load drivers for it.  I did and loaded the drivers, then
>> rebooted the system.  When the system came back up the network card was
>> no longer working, and checking dmesg I saw the ds: no socket drivers
>> loaded!.
>> Well, I then removed the modem drivers "rpm -e" and rebooted again.
>> Still no working network card, I tried booting to my backup kernel,
>> still no luck.
>> I have run "redhat-config-network" and redefined my network card, and
>> still I get that accursed ds: no socket drivers loaded!.
>>
>> Does anyone have any ideas on this????
>>
>> Thanks...
>>
>> -------------------------------------------------------------------------
--------------------------
>> C.J. Keist                                                     Phone:
>> 970-491-0630
>> UNIX/Network Manager                           Fax: 970-491-5569
>> Colorado State University                        email:
>> cjay at engr.colostate.edu
>> Dean of Engineering
>>
>> I just want the chance to prove, "Money can't buy happiness"....
>>
>> _______________________________________________
>> NCLUG mailing list       NCLUG at nclug.org
>>
>> To unsubscribe, subscribe, or modify your settings, go to:
>> http://www.nclug.org/mailman/listinfo/nclug
>>
>
>
>
>
> _______________________________________________
> NCLUG mailing list       NCLUG at nclug.org
>
> To unsubscribe, subscribe, or modify your settings, go to:
> http://www.nclug.org/mailman/listinfo/nclug
>
----------------------------------------------------------------------------
-----------------------
C.J. Keist                                                     Phone:
970-491-0630
UNIX/Network Manager                           Fax: 970-491-5569
Colorado State University                        email:
cjay at engr.colostate.edu
Dean of Engineering

I just want the chance to prove, "Money can't buy happiness"....

_______________________________________________
NCLUG mailing list       NCLUG at nclug.org

To unsubscribe, subscribe, or modify your settings, go to:
http://www.nclug.org/mailman/listinfo/nclug




More information about the NCLUG mailing list