Tuesday November 12th, 2024 NCLUG Meeting

Evelyn Mitchell efmphone at gmail.com
Wed Nov 13 15:45:25 UTC 2024


The ONT is a fairly stupid device, it translates between optical and
electric in order to pick up data for your address but is not firewalling.
If you have a router or firewall on your internal network that may be the
issue.

How are you testing that the 2605:b40:1516:a200:8433:8e2d:2bad:e833/64 is
reachable?

Are you using ping6 and traceroute6?

Is your router between the ONT and that server passing IPV6 traffic?

Is your firewall configured to pass IPV6 for that range?

You can test from "outside" with one of the online Looking glass servers.

I hope that helps. I haven't done much with IPV6 that is attempting to be
publicly routable.

Evelyn


On Tue, Nov 12, 2024, 10:31 PM Bob Proulx <bob at proulx.com> wrote:

> Evelyn Mitchell wrote:
> > Bob, you already have IPv6 addresses locally, as you know. Linux has had
> > good support for IPv6 for more than 20 years.
>
> Right.  Linux has good support for it.  But a Nokia Gateway 3 ONT
> fiber modem?  Not so much as it turns out!
>
> > If you want to get a public IPv6 allocation you talk with ARIN:
>
> Oh there has been a terrible misunderstanding!  I have IPv6 to my
> house Noika ONT fiber modem.  But the Nokia just seems buggy providing
> it to my machines.  By machines I mean my Devuan/Debian machine or my
> FreeBSD machine.  I set up an Ubuntu 24.04 as a "standard system" in
> order to have a dedicated debug system.
>
>     rwp at ubuntu2404:~$ ip -6 addr show eth0
>         2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP group default qlen 1000
>             link/ether 84:47:09:1d:9d:e5 brd ff:ff:ff:ff:ff:ff
>             altname enp1s0
>             inet 192.168.10.64/24 brd 192.168.10.255 scope global dynamic
> noprefixroute eth0
>                valid_lft 86152sec preferred_lft 86152sec
>             inet6 2605:b40:1516:a200:8433:8e2d:2bad:e833/64 scope global
> temporary dynamic
>                valid_lft 42953sec preferred_lft 42953sec
>             inet6 2605:b40:1516:a200:37cb:35cf:cdec:71fe/64 scope global
> dynamic mngtmpaddr noprefixroute
>                valid_lft 42953sec preferred_lft 42953sec
>             inet6 2605:b40:13a3:8c00:8d22:2638:7c8f:902f/64 scope global
> temporary dynamic
>                valid_lft 43000sec preferred_lft 43000sec
>             inet6 2605:b40:13a3:8c00:6f33:ffb3:f4f6:9c7b/64 scope global
> dynamic mngtmpaddr noprefixroute
>                valid_lft 43000sec preferred_lft 43000sec
>             inet6 2605:b40:1516:a200:cab8:74a9:bb3c:a084/64 scope global
> temporary dynamic
>                valid_lft 42953sec preferred_lft 42953sec
>             inet6 fe80::4425:2931:5fcd:845/64 scope link noprefixroute
>                valid_lft forever preferred_lft forever
>
> As you can see I have IPv6 addresses.  Lots of IPv6 addresses. Several
> more than I need.  Now if they were all WORKING addresses then I would
> have something!
>
> It's a similar problem on FreeBSD and my other Linux kernel machine
> too.  Two different operating systems are giving basically the same
> results makes me think the problem is not in them but in the Nokia.
>
> Bob
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.nclug.org/pipermail/nclug/attachments/20241113/6eaa0142/attachment.htm>


More information about the NCLUG mailing list